Tantalum Capacitors
Tantalum Through-Hole Capacitors • Radial Dipped
T396/T398 Series Three-Leaded UltraDip III
Dimensions
Series
Capacitance Range
Benefits
W x T x H (inches)
A
B
C
D
E
0.280 x 0.190 x 0.310/0.355
0.280 x 0.190 x 0.320/0.365
0.280 x 0.200 x 0.360/0.390
0.280 x 0.200 x 0.3ꢀ0/0.390
0.280 x 0.230 x 0.380/0.415
0.280 x 0.240 x 0.410/0.430
0.280 x 0.250 x 0.420/0.440
0.280 x 0.2ꢀ0 x 0.420/0.440
0.300 x 0.300 x 0.460/0.480
0.340 x 0.340 x 0.500/0.500
0.340 x 0.340 x 0.560/0.580
0.360 x 0.360 x 0.620/0.620
0.10µF - 10µF
0.4ꢀµF - 15µF
2.2µF - 22µF
3.3µF - 33µF
• 3 - 50 Volts
•
20%, 10% capacitance tolerance
1.5µF - 4ꢀµF
• Tape and reel packaging available
• Three lead design, fail-safe insertion
• Available RoHS-compliant
F
3.3µF - 68µF
G
H
J
4.ꢀµF - 100µF
22.0µF - 150µF
6.8µF - 220µF
10.0µF - 330µF
15.0µF - 4ꢀ0µF
22.0µF - 680µF
Note: “H“ dimension is for both T396/T398
K
L
M
Tantalum Through-Hole Capacitors • Molded Axial & Radial
T32X Series CX01/05 Style MIL-PRF-49137/1 & 5
Dimensions
D x L x W (inches)
Series
Capacitance Range
Benefits
A
B
C
D
E
0.095 x 0.260 x 0.020
0.10µF - 10µF
0.33µF - 33µF
1.2µF - 68µF
2.ꢀµF - 68µF
5.6µF - 220µF
12.0µF - 330µF
• 2 - 50 Volts
20%, 10%, 5% capacitance tolerance
• Tape and reel packaging available
• MIL-PRF-4913ꢀ/1 & 5 (CX01 & CX05) approved
• Miniature - polar type
0.110 x 0.290 x 0.020
0.180 x 0.345 x 0.020
0.180 x 0.420 x 0.020
0.280 x 0.530 x 0.025
0.300 x 0.ꢀ10 x 0.025
•
• See www.kemet.com for QPL information
• Available RoHS-compliant
F
Disclamer
All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to
constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this
Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or
results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures
may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as
installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property
damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other
measures may not be required.
Images may be enlarged to show detail.
©2012 • KEMET Electro©nic2s01C2or•poKrEaMtioEnT•ElPe.cOt.roBnoixcs5C92o8rp•oraGtrieoenn•vilPl.eO,.SBCo2x95690268••(G86re4e)n9v6il3le-,6S30C02•96w06w•w.8k6em4.e9t6.3co.6m300 • www.kemet.com
62 62
KEMET [ KEMET CORPORATION ]
