欢迎访问ic37.com |
会员登录 免费注册
发布采购

13030-03MASLT 参数 Datasheet PDF下载

13030-03MASLT图片预览
型号: 13030-03MASLT
PDF下载: 下载PDF文件 查看货源
内容描述: [Tantalum Capacitor, Tantalum (solid Polymer)]
分类和应用: 电容器
文件页数/大小: 11 页 / 1926 K
品牌: KEMET [ KEMET CORPORATION ]
 浏览型号13030-03MASLT的Datasheet PDF文件第2页浏览型号13030-03MASLT的Datasheet PDF文件第3页浏览型号13030-03MASLT的Datasheet PDF文件第4页浏览型号13030-03MASLT的Datasheet PDF文件第5页浏览型号13030-03MASLT的Datasheet PDF文件第6页浏览型号13030-03MASLT的Datasheet PDF文件第7页浏览型号13030-03MASLT的Datasheet PDF文件第8页浏览型号13030-03MASLT的Datasheet PDF文件第9页  
Tantalum Through-Hole Capacitors – Hermetically Sealed
T550 Axial Polymer Hermetic Seal (PHS) 105°C
and DLA Series
Overview
The KEMET T550 Series Polymer Hermetic Seal (PHS)
is a tantalum capacitor with a Ta anode and Ta
2
O
5
dielectric. A conductive organic polymer replaces the
traditionally used MnO
2
or wet electrolyte as the cathode
plate of the capacitor. This results in very low ESR and
improved capacitance retention at high frequency and low
temperature. The T550 Series PHS also exhibits a benign
failure mode which eliminates the case breach that can
occur in wet tantalum types. Additionally, this part may
be operated at voltages up to 80% of rated voltage with
equivalent or better reliability than traditional MnO
2
or wet
tantalum capacitors operated at 50% of rated voltage.
T550 Series PHS also offers higher ripple current handling
capability and a lower ESR range than wet tantalums.
With reduced ESR and enhanced capacitance retention at
higher frequencies and low temperatures, the T550 Series
PHS provides the highest total capacitance and the most
economical solution for high power applications, all within an
approximately 25% lighter package than the equivalent wet
tantalum capacitor.
Benefits
• Includes F-Tech anode which eliminates hidden defects
in the dielectric
• 100% Simulated Breakdown Screening
• Maximum operating temperature of +105°C
• Meets all requirements of DLA Drawing 13030
• Polymer cathode technology
• Extremely low ESR
• High frequency capacitance retention
• Low temperature capacitance retention
• 100% accelerated steady state aging (240 hours)
• 100% surge current tested, 10 cycles +25°C
• Volumetrically efficient
• Non-ignition failure mode
• Approximately 25% lighter than equivalent wet tantalum
• Case dimensions equivalent to
MIL–PRF–39006/22/25/30/31
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include high voltage power management such as buck/boost converters, filtering, hold-up capacitors,
and other high ripple current applications.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2059_T550 • 1/12/2018
1