Design Note DN025
3.2
ValueLine Reference Design
The integrated inductor ValueLine Reference designs offer the lowest possible cost. The
schematics are similar to those shown in Figure 2 and Figure 3 with the exception that the
inductors have been integrated into the PCB. This gives a cost advantage but also means
that the reference design must be strictly followed by using the same PCB thickness
otherwise the performance will change.
The integrated inductor ValueLine reference designs have the
lowest cost but are also the
largest in size.
Figure 4. Top Layer integrated inductor Valueline Reference Design for the CC110x and
CC111x 868/915 MHz
SWRA250A
Page 4 of 26