JMK, Inc.
The ZL-1906-15 is a 3ph, Y, filter developed to meet the
requirements of MIL-STD-461E.
Generally this filter should perform well for the CE102
conducted emissions and will help some for the CE101
emissions.
The filter also has significant transient suppression to
ensure meeting the requirements of CS116 or a nearby
lightening strike.
If the filter will be used only with a 125Vac input (Line—
Neutral), some adjustment can be made to the transient
suppression devices to lower the clamping voltage.
MTBF: 1151277 hours @ 30ºC, ground benign.
ZL-1906-15
Perfomance Characteristics
Operating voltage: 3Ph,125 Vac, 50—400 Hz
3Ph, 250 Vac, 50/60 Hz
Max. operating current: 15 ampere per Phase
Operating temperature: -40—50ºC
Dielectric Withstand. Line/case: 1500 Vac. (1.0 minute)
Dielectric Withstand. Line/Neut: 1500 Vdc. (1.0 minute)
Capacitance, (Each line—case): 0.02 µF max.
Transient energy absorption 8/20 µsec: 130 Joule/Line
Minimum Varistor clamping Voltage: 354 volt
No load current (line—Neut):
0.25A max @ 125V, 60Hz
1.60A max @ 125V,400Hz
Leakage current 125V, 60 Hz: 2.25 ma max
125V, 400 Hz: 15.1 ma max
250 V, 50 Hz: 3.75 ma max
(L/L) discharge voltage after disconnect from power:
110V: 75 volt max after 1.0 second
30 volt max after 2.0 second
Order Part number :
ZL-1906-15
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031
JMK Ltd Glasgow, Scotland UK
PH: 603 886-4100
FX: 603 886-4115
email: info@jmkfilters.com
PH: 44-(0) 1389-751841 FX: 44-(0) 141 589-1884
JMK [ JMK INC. ]
