KK-0902-20-30
Operating Voltage = 250/480 Vac 3 PH Wye
Operating Current Max= 20 & 30 amps
Operating Frequency = 50 - 60Hz
Operating Temperature = -20 to +50oC
Diel Withstand ( L to Case)= 1500V~for 1 Min.
Diel Withstand ( L to L )= 1500Vdc for 1 Min.
Leakage current @ 250V~50Hz= 1.8 mA
Max Residual Voltage after 5 secs = 34 Volts Max
Agency Approvals = UL ( Pending)
Ordering Information:
20 Amps 10-32 Threaded Terminals KK-0902-20
30 Amps 10-32 Threaded Terminals KK-0902-30
The 902 filter is a three phase filter designed to operate with
computers, motors, power distribution systems or any system
using three phase power.
This filter is designed to be used on 3 phase wye power systems
but can be used in a delta configuration by not connecting to the
neutral (N) terminal of the filter. The ground coil is designed to
eliminate ground loops caused by inter-system connections.
The package features threaded studs for mounting in a "through
bulkhead" manner providing the ultimate in RF noise suppres-
sion. The filter can also be purchased without the ground coil
for use with stand alone systems.
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031
JMK Inc Glasgow G13 1DN Scotland UK
PH: 603 886-4100
FX: 603 886-4115
email: info@jmkfilters.com
PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884
JMK [ JMK INC. ]
