HIGH-POWER Q-SWITCHED DIODE-PUMPED UV LASER
6
Q-PS-1000R Power Supply
Parameter
Specification
Front panel/display
Power on/off key
Shutter open/closed switch (Status LED)
Status Display (4 line x 20 character vacuum fluorescent)
RS232 Serial Port Connector (9-pin D-sub)
RS232 Serial Port Connector (Identical to front panel)
Interlock connector (2-pin, 0.1” spacing)
Q switch RF connector (SMA connector)
Umbilical connector (multi-pin D-shaped)
Chiller communication port (9-pin D-sub)
Emission indicator connector (2-pin, 0.1” spacing)
External control port (10-pin 3M-style)
Slot for optional standard or custom interface board (standard with 3 BNC connectors)
Ground pin
Rear panel
Fuse holder
Power Switch
Power cord connector
Weight
20.5 lbs (9.3 kg)
Umbilical cable length
Frequency
Standard: 10 ft. (3.0 m); optional: 16.4 ft. (5.0 m)
100 to 240 V AC, 50 – 60 Hz
Power
<550 W (400 W typical)
Input and Ambient
Voltage, frequency
Power
Operating ambient temperature
Relative humidity, non-condensing
Storage temperature
100 to 240 V AC, 50 – 60 Hz
<550 W (400 W typical)
15 to 35°C
10 – 80%
-20 to 55°C
QA-CH Chiller
Parameter
Specification
Cooling capacity
Refrigerant
>300 W
R134a
Coolant
Distilled or tap water
<1 gal (3.8 l)
<0.4 gpm at 6 psi (1.5 lpm at 0.4 atm)
121 lbs (55 kg)
Standard: 9.5 ft (2.9 m); optional: 16 ft (4.9 m)
10 ft (3.0 m)
Reservoir volume
Coolant flow rate
Weight, reservoir empty
Hose length
Control cable length
Input and Ambient
Voltage, frequency1
90 to 110 and 180 to 220 V AC, 50 Hz
105 to 125 and 210 to 250 V AC, 60 Hz
<1000 W (700 W typical)
15 to 35°C
10 to 80%
-20 to 55°C
Power
Operating ambient temperature
Relative humidity, non-condensing
Storage temperature
Orientation
Upright position only
1. For 200/230 VAC version, the model number is QA-CH-E.
JDSU [ JDSU ]
