ETHERNID GE
4
Specifications
Network-side interface
10/100/1000BaseTX/FX/LX/SX
(depends if SFP is used)
Connector: SFP module or RJ-45
(Auto-negotiation/Auto MDIX)
Performance Assurance Agent™ (PAA™)
Constant in-service monitoring of SLA param-
eters including:
Packet loss
– Two-way delay (Round-trip Latency)
– Two-way delay variation (Round-trip Jitter)
– One-way delay variation (One-way Jitter)
– Continuous End-to-End path Continuity
Check
High Precision measurements: 1 microsecond
accuracy
Works at Layer 2 and Layer 3
Assures SLAs per VLAN/per CoS/per ToS/per
EVC
Can work in point-to-point or point-to-multi-
point
Multiple Instance capable (Multi-SLA™)
User settable SLA threshold crossing alerts
using SNMP traps
Management
In-band remote management over the
Ethernet customer line via Network-side inter-
face
Local Management craft port: 10/100BaseT,
RJ-45 connector
Serial RS-232 Management port: RJ-45 con-
nector
Secure Web GUI via SSL
Secure CLI command prompt via SSH
SNMP V1,V2C
Management VLAN
802.3ah EFM OAM
NTP client
Remote and Local Syslog
Radius Authentication
DNS Client
DHCP Client
Config. import/export
FTP,TFTP, SFTP, HTTP
Client-side interface
10/100/1000BaseTX/FX/LX/SX
(depends if SFP is used)
Connector: SFP module or RJ-45
(Auto-negotiation/Auto MDIX)
NID features
IEEE 802.3ah Ethernet OAM
Implements a Two-Port MAC Relay (TPMR)
function aligned with IEEE's 802.1aj, 802.1ad,
and 802.1ag/ITU-T Y.1731 drafts
Loop-backs:
– Layer 1, Layer 2 (MAC Swap), Layer 3 (IP
Swap), Layer 4 (TCP/UDP Port Swap)
– Automatically reacts to in-band loop-back
commands of industry-popular Ethernet test-
sets
– Individual VLAN loop-backs
– Loop-back on specific MAC source and/or
destination address
– Loop-back on specific IP source and/or desti-
nation address
Thru-Traffic Per-flow statistics (per VLAN, per
Ethertype, per ToS, per CoS, per MAC, per IP,
etc.)
VLAN Tagging/De-tagging
VLAN Stacking (.1Q in .1Q)
Through Traffic Wire-Speed Filtering (L2CP,
BPDU, per-VLAN, Ethertype, Protocol type,MAC,
IP,User Defined)
Dual Monitor Access Ports providing individual
access to both signal directions, combined
access to both directions, Layer 1 tapping and
intelligent filtering
Integrated Copper TDR cable integrity testing
Dying Gasp (via 802.3ah or SNMP traps)
Supports packet sizes up to 1800 bytes
Fault Propagation
Link Loss Return
Inline transparent performance
Throughput: wire-speed (100Mb/s at 100%
utilization)
Intrinsic Passthrough Traffic Latency: <8 micro-
second (at all packet sizes)
Intrinsic Passthrough Traffic Jitter: <1 microsec-
ond (at all packet sizes)
Intrinsic Latency for Intelligent Loopback: <8
microsecond (at all packet sizes)
Intrinsic Jitter for Intelligent Loopback: <1
microsecond (at all packet sizes)
Optional Network-Client Power Fail-over
bypass mode
Power options all included as standard
and redundant between each other
External AC/DC adapter (120-240 Vac auto-
sensing, 50-60 Hz), 5 Vdc input to unit
Dual (A/B) -48 Vdc Central Office Supply inputs
PoE from RJ-45 (802.3af )
Power Consumption: 5 watts
Cooling: convection cooled (no fans)
Regulatory
Physical
1.60" H x 5.34" W x 5.80" D
Mounting:
– Desktop
– Wall-mount
– Rack-mount (2 units side-by-side in 1U)
– 12 position, high-density, 19” central office
shelf (4U): EtherSHELF™
IEC 60950
FCC Part 15 Class A
Industry Canada CS-03
CE Mark
Operating Temperature
0-50 degree C
Storage Temperature
-40 to 70 degree C
Humidity
5-95% non-condensing
JDSU [ JDS UNIPHASE CORPORATION ]
