ETHERNID OE
4
Specifications
Network-sideinterface
100BaseFX/LX/SX/ZX/BX
(dependswhichSFPisused)
Connector: SFP module
PerformanceAssuranceAgent™(PAA™)
Management
Constant in-service monitoring of SLA param-
eters including:
Packet loss
– Two-way delay (Round-trip Latency)
– Two-way delay variation (Round-trip Jitter)
– One-way delay variation (One-way Jitter)
– Continuous End-to-End path Continuity
Check
In-band remote management over the
Ethernet customer line via Network-side inter-
face
Local Management craft port: 10/100BaseT,
RJ-45 connector
Client-sideinterface
10/100BaseTX
Connector: RJ-45
(Auto-negotiation/Auto MDIX)
Serial RS-232 Management port: RJ-45 con-
nector
Secure Web GUI via SSL
Secure CLI command prompt via SSH
SNMP V1,V2C
High Precision measurements: 1 microsecond
accuracy
NIDfeatures
Works at Layer 2 and Layer 3
IEEE 802.3ah Ethernet OAM
Management VLAN
802.3ah EFM OAM
NTP client
Assures SLAs per VLAN/per CoS/per ToS/per
EVC
Implements a Two-Port MAC Relay (TPMR)
function aligned with IEEE's 802.1aj, 802.1ad,
and 802.1ag/ITU-T Y.1731 drafts
Can work in point-to-point or point-to-multi-
point
Remote and Local Syslog
Radius Authentication
DNS Client
Loop-backs:
Multiple Instance capable (Multi-SLA™)
– Layer 1, Layer 2 (MAC Swap), Layer 3 (IP
Swap), Layer 4 (TCP/UDP Port Swap)
– Automatically reacts to in-band loop-back
commands of industry-popular Ethernet test-
sets
– Individual VLAN loop-backs
– Loop-back on specific MAC source and/or
destination address
User settable SLA threshold crossing alerts
using SNMP traps
DHCP Client
Config. import/export
FTP,TFTP, SFTP, HTTP
Inlinetransparentperformance
Throughput: wire-speed (100 Mb/s at 100%
utilization)
Poweroptionsallincludedasstandard
andredundantbetweeneachother
Intrinsic Passthrough Traffic Latency: <8 micro-
second (at all packet sizes)
– Loop-back on specific IP source and/or desti-
nation address
Intrinsic Passthrough Traffic Jitter: <1 microsec-
ond (at all packet sizes)
Thru-Traffic Per-flow statistics (per VLAN, per
Ethertype, per ToS, per CoS, per MAC, per IP,
etc.)
External AC/DC adapter (120-240 Vac auto-
sensing, 50-60 Hz), 5 Vdc input to unit
Intrinsic Latency for Intelligent Loopback: <8
microsecond (at all packet sizes)
Dual (A/B) -48 Vdc Central Office Supply inputs
PoE from RJ-45 (802.3af)
VLAN Tagging/De-tagging
VLAN Stacking (.1Q in .1Q)
Intrinsic Jitter for Intelligent Loopback: <1
microsecond (at all packet sizes)
Power Consumption: 5 watts
Through Traffic Wire-Speed Filtering (L2CP,
BPDU, per-VLAN, Ethertype, Protocol type,MAC,
IP,User Defined)
Cooling: convection cooled (no fans)
Optional Network-Client Power Fail-over
bypass mode
Dual Monitor Access Ports providing individual
access to both signal directions, combined
access to both directions, Layer 1 tapping and
intelligent filtering
Regulatory
Physical
IEC 60950
1.60" H x 5.34" W x 5.80" D
Mounting:
– Desktop
FCC Part 15 Class A
Industry Canada CS-03
CE Mark
Integrated Copper TDR cable integrity testing
Dying Gasp (via 802.3ah or SNMP traps)
Supports packet sizes up to 1800 bytes
Fault Propagation
– Wall-mount
– Rack-mount (2 units side-by-side in 1U)
– 12 position, high-density, 19” central office
shelf (4U): EtherSHELF™
OperatingTemperature
0-50 degree C
Link Loss Return
StorageTemperature
-40 to 70 degree C
Humidity
5-95% non-condensing
JDSU [ JDSU ]
