3205-D/3206-D TUNABLE LASER SUBASSEMBLY
6
TLSA Installation
The TLSA electrical connector pins will withstand mating forces similar to those of internal personal computer ribbon cables.
Because the complete TLSA is not hermetically sealed, do not immerse it or spray it with cleaning solutions or solvents.
The fiber connector handling/protection (dust) cap and the fiber pigtail materials can deform at temperatures above +85°C.
TLSA Handling Considerations
Although the TLSA has been designed to be physically robust, use care during handing and installation. Keep optical
connector clean and free of surface particles.
Keep the optical connector handling/protection cap in place when the fiber pigtail is not mated. Oil-free canned air or
nitrogen with an extension tube may be used to help remove surface particles.
Observe normal industry procedures for handling and cleaning. Use care in controlling the minimum fiber bend radius.
Make sure that the protection cap is debris-free and clean prior to reinstalling it on the optical connector.
Patents
This product is protected under U.S. Patent Number 4,896,325 and other patents pending worldwide.
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: 3205-D-00
3 2 0
Code
Model
3205-D 3205-D
3206-D 3206-D
-
D -
Code
00
01
02
Connector Type
1
ST/UPC
ferrule 1
FC/UPC
SC/UPC
1. Other connector styles and fiber lengths may be available by special order.