欢迎访问ic37.com |
会员登录 免费注册
发布采购

24-00147 参数 Datasheet PDF下载

24-00147图片预览
型号: 24-00147
PDF下载: 下载PDF文件 查看货源
内容描述: 二极管激光器,高亮度0.6〜 8.5 W,波长8XX [Diode Lasers, High Brightness 0.6 to 8.5 W, 8xx nm]
分类和应用: 光电二极管
文件页数/大小: 11 页 / 539 K
品牌: JDSU [ JDSU ]
 浏览型号24-00147的Datasheet PDF文件第3页浏览型号24-00147的Datasheet PDF文件第4页浏览型号24-00147的Datasheet PDF文件第5页浏览型号24-00147的Datasheet PDF文件第6页浏览型号24-00147的Datasheet PDF文件第7页浏览型号24-00147的Datasheet PDF文件第8页浏览型号24-00147的Datasheet PDF文件第9页浏览型号24-00147的Datasheet PDF文件第10页  
24XX SERIES DIODE LASERS  
User Safety  
Safety and Operating Considerations  
The laser light emitted from this diode laser is invisible and may be harmful to the human eye. Avoid looking directly into the  
diode laser, into the collimated beam along its optical axis, or directly into the fiber when the device is in operation.  
CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.  
Operating the diode laser outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used  
with the component must be employed such that the maximum peak optical power cannot be exceeded.  
CW diode lasers may be damaged by excessive drive current or switching transients. When power supplies are used, the diode  
laser should be connected with the main power on and the output voltage at zero. The current should be increased slowly while  
the diode laser output power and the drive current are monitored.  
Device degradation accelerates with increased temperature, and therefore careful attention to minimize the case temperature  
is advised. For example, life expectancy will decrease by a factor of four if the case is operated at 50°C rather than 30°C.  
A proper heatsink for the diode laser on a thermal radiator will greatly enhance laser life. Firmly mount the laser on a radiator  
with a thermal impedance of less than 0.5°C/W for increased reliability.  
ESD PROTECTION – Electrostatic discharge is the primary cause of unexpected diode laser failure. Take extreme precaution  
to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling diode lasers.  
Labeling  
21 CFR 1040.10 Compliance  
Because of the small size of these devices, each of the labels shown is attached to the individual shipping container. They are  
illustrated here to comply with 21 CFR 1040.10 as applicable under the Radiation Control for Health and Safety Act of 1968.  
Serial Number Identification Label  
Output Power Danger Labels  
Package Aperture Label  
Laser  
Radiation  
JDS Uniphase Corporation  
DANGER  
DANGER  
INVISIBLE LASER RADIATION*  
AVOID EYE OR SKIN EXPOSURE TO  
DIRECT OR SCATTERED RADIATION  
INVISIBLE LASER  
RADIATION IS EMIT-  
TED AS SHOWN.  
MODEL:  
S/N:  
MANUFACTURED:  
WAVELENGTH:  
GaAlAs Diode CW  
8 W max.  
I op:  
CLASS IV LASER PRODUCT  
3110  
3011  
*SEE MANUAL  
This laser product complies with 21 CFR 1040 as applicable  
24ꢀꢀ Series  
A Package Diodes  
246ꢀ Series  
247ꢀ Series  
249ꢀ Series  
2496 Series  
NORTH AMERICA: 800 498-JDSU (5378)  
WORLDWIDE: +800 5378-JDSU  
WEBSITE: www.jdsu.com  
Product specifications and descriptions in this document subject to change without notice. © 2009 JDS Uniphase Corporation 1012±8±1 010 0309 24XXDIODELASER.DS.CL.AE  
March 2009