CW SINGLE-FREQUENCY IR LASER
3
NPRO 125 Specifications
1
Parameter
Wavelength
CW power
Spatial mode
Longitudinal mode
Linewidth
Coherence length, calculated
Frequency drift
2
Amplitude noise, 10 Hz to 2 MHz
Power drift over 8 hours
3
Thermal tuning range, continuous
Thermal tuning range, total
Thermal tuning rate
Piezo tuning range, 0 to 100 V
Piezo response bandwidth, small signal
Warm-up time, from cold start (AC off)
Dimensions
Laser head size (W x H x D)
Weight
Fiberoptic
Fiber supplier and part number
Fiber pigtail length
Fiber pigtail connector alignment
Polarization, linear
Mode field diameter, NA
1. Fiber-coupled output.
125N-1319-xxx
1319 nm
>100, 150, 200 mW
TEM
00
Single frequency
<5 kHz/ms
>1000 m
<50 MHz/hour
<0.05% rms
<5% peak-to-peak
>10 GHz
>30 GHz
>1 GHz/second
>30 MHz
>30 kHz
1 minute
6 x 8 x 20 cm
1.2 kg (2.65 lbs)
Fujikura SM13-P7/125-UV/UV-400
>2 m
FC/PC, key parallel to slow axis
>30:1, parallel to connector key
9.5 µm, 0.11
125N-1064-xxx
1064 nm
>25 mW
TEM
00
Single frequency
<5 kHz/ms
>1000 m
<50 MHz/hour
<0.05% rms
<5% peak-to-peak
>10 GHz
>30 GHz
>1 GHz/second
>30 MHz
>30 kHz
1 minute
6 x 8 x 20 cm
1.2kg (2.65 lbs)
3M FS-PM-5121
>2 m
FC/PC, key parallel to slow axis
>30:1, parallel to connector key
7.2 µm, 0.11
2. Base temperature constant to within <2 °C, total range, after 30 minute warm-up.
3. Base temperature constant to within <5 °C, total range, after 30 minute warm-up.
JDSU [ JDS UNIPHASE CORPORATION ]
