RSAM-5600 REMOTE SERVICE ANALYZER MODULE
4
Test All Channels
Eliminate driving to remote hubsites
to perform system checks. With the
all channels report, detailed analysis of
system performance is just one mouse
click away. The All Channels Report
provides channel by channel details
including Video level, Audio Level,
delta V/A, digital power level, MER,
and compares the results against four
user defined limit sets. The reports
are presented in a tabular format that
can then be printed for recording the
remote systems performance.
Single Channel
In depth analysis and detailed
troubleshooting
of
individual
channels with the Single Channel
Report provides measurement results
on a per channel basis. Identify
performance issues on digital channels
such as average power level, MER, and
BER. The user interface provides
quick graphical feedback of the
pass/fail status of the test. Access to
single channel test is also available in
the field using the DSAM WFA-
Browser option allowing field
technicians to determine if the
problem is from the source or caused
by network conditions without calling
a headend technician.
Performance Monitoring and
SNMP Events
The RSAM-5600 will be continuously
performing the All Channels Test in
the background regardless of a users
request. While performing the test, the
RSAM
will
compare
the
measurements against the “critical”
limit set. Using SNMP traps, the
RSAM will send notification of events
when measurements violate the limit
thresholds. The SNMP events are
generated at the RSAM and can be
filtered and consolidated using an OSS
or network management system.
Single Channel Report of a digital channel
All Channels Report of analog channels
Custom build hierarchies to fit your network
On Demand Report from remote sites
JDSU [ JDS UNIPHASE CORPORATION ]
