RSAM-5600 REMOTE SERVICE ANALYZER MODULE
3
Integrated solution
The RSAM is configured using the
JDSU
FDM-100
Field
Data
Management software. Easily set-up,
maintain and update channel plans
and limits. The FDM-100 interface is
common between DSAM field meters
and the RSAM-5600 and even
provides asset management of your
RSAM-5600 deployments.
Accessing RSAM measurement is
accomplished via the RAS-100 Remote
Analysis Software. The RAS-100
provides a browser compatible
interface via a web server which
services measurement requests to
individual RSAM units. There are no
clients to purchase or install in your
system. View the results 24/7 from
anywhere—including over an RF
network on the DSAM. The RAS-100
Remote Analysis Software responds to
requests and formats the web page
appropriately for the DSAM WFA web
browser or a standard Internet web
browser.
On Demand Reporting
Full Scan
From a PC web browser, a technician
can quickly analyze system levels using
the Full Scan report. This report
graphically depicts the analog video
levels and average digital power levels
across the channel lineup. The user
can then quickly compare the levels to
the 4 different thresholds to determine
the systems health. From the field, a
user equipped with a DSAM with the
WFA Browser option can also
remotely view the full scan.
Ethernet
PC
Hub
RSAM-5600
Primary Fiber Ring
Hub
Hub
Remote view of Scan Graph on PC Internet Browser
Coax
Distribution
Network
DSAM-2500
Figure 2: Remote service analysis
Remote view of Scan Graph on a DSAM
JDSU [ JDS UNIPHASE CORPORATION ]
