EC-motor with planetary gear unit
for automatic spindle positioning cycles
Motors
BG440
Part number
BG440.
0
52
01
Firmware
01
Firmware version 01
Gear transmission
52 ø52 mm
Scaling
0 50:1
Performance
25 20 W
50 40 W
Accessories
Connectors and cables
(page %S)
Z 165.M01
Z 165.M02
Motor supply cable 1.5 m, 8-pin mating
conntector
Motor supply cable 3 m, 8-pin mating
connector
Description
Motors of the BG440 series are EC motors (brushless DC-
motors) with integrated rotation speed electronics. BG440
series comprises two designs with different dimensions and
output power of 20 W and 40 W. The EC motor featuring
a fully assembled planetary gear unit is a compact drive in
electric spindle positioning operations of the multiconDrive
system.
It provides a separate round connector output enabling
direct motor connection to the spindle position display
(N 142, N 152). This “interface” provides the motor with the
control signals for “clockwise”, “counterclockwise” and “off”
as well as with the signal for recalling two permanent motor
speed parameters relating to high and low speed. Already
predefined ramps for acceleration respectively deceleration
secure smooth motor start and slow-down.
2
www.baumerivo.com
30/10/2008
Subject to modification in technic and design. Errors and omissions excepted.