MPS Series
Magnetic Proximity Sensors
SWITCH
MAGNET
SWITCH & MAGNET
PANEL MOUNTING
OFFSET OF CENTERLINES AND DISTANCE BETWEEN
FACES OF SWITCH AND MAGNET (INCHES).
PART
NUMBER
ACTUATION CHART
SWITCH TYPE
3/4" Diameter recessed magnetic
contact, 1 1/4" make gap.
MPS70WGW
Actuating Positions
Gap Distance
When installing recessed and surface mount contacts, magnet position Gap distance is a combination of the horizontal and vertical plane sep-
is very important. The switch and magnet must always be parallel or
aration of the switch and magnet. Example: if a recessed magnet
end to end, and never in a ‘T’ configuration.
is 1/4" off the centerline of the switch, the make gap is reduced by 1/4"
Correct Configuration
Incorrect Configuration
Center Alignment
Off Center Alignment
1/4,
1 1/4"
Make
Gap
1"
Make
Gap
F
Detect
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–24
www.ittcannon.com
ITT [ ITT INDUSTRIES ]
