RF Coaxial Connectors
AI-98
Assembly Instructions
SMA Right Angle Connectors, Direct Solder Type for Semi-Rigid Cable
BODY ASSEMBLY
CAP
1. Trim cable jacket, dielectric and center conductor to dimensions shown, being careful not to fracture
the center conductor. Tin center conductor (DO NOT OVER TIN).
A
4,75
±
0,13 (.187
±
.005)
B
2,29
±
0,13 (.097
±
.005)
2. Slide cable into body and solder into place.
3. Solder center conductor to contact (do not over solder), then locate the cap in rear of body and dimple
or lightly punch to ensure it is locked in position.
Assy Insts
Dimensions are shown in mm (inch)
Dimensions subject to change
111
ITT [ ITT INDUSTRIES ]
