RF Coaxial Connectors
Specifications
ELECTRICAL
Impedance
Frequency Range
Voltage Rating *
Insulation Resistance
Contact Resistance
Reflection Coefficient *
75 nominal
0 - 1 GHz
At Sea Level = 330 Vrms
10 G minimum
Inner contact = 4 m maximum
Outer contact = 2 m maximum
With f = 0.1 GHz
= 0.02 maximum
With f = 0.1 – 0.5 GHz
= 0.04 maximum
With f = 0.5 – 1.0 GHz
= 0.10 maximum
1.6 / 5.6
MECHANICAL
Withdrawal force inner female contact
Withdrawal force inner male contact
Insertion force between jacks and plugs
Withdrawal force between jacks and plugs
Materials
Finish/Plating
ENVIRONMENTAL
GENERAL
Temperature Rating
Connector Durability
Standards
0.5 N (0.11 lbs.) minimum
1.7 N (0.38 lbs.) minimum
Screw types: 12 N (2.7 lbs.) maximum. Push-pull type: 20 N (4.5 lbs.) maximum
Screw types: 22 N (4.9 lbs.) minimum. Push-pull type: 20 N (4.5 lbs.) maximum
Bodies and nuts: Brass. Inner male contact: Brass.
Inner female contact and outer male contact: Beryllium copper. Insulators: PTFE.
Crimp ferrules: Annealed copper alloy.
Contact surfaces: Gold over nickel. Female bodies: Gold over nickel. Male bodies: Nickel or silver. Nuts
and crimp ferrules: Nickel
−40°
C to 85° C
500 matings minimum
CECC 22240, DIN 47295, IEC 169-13
* Guideline value only– will depend on cable and connector type
1.6/5.6
Dimensions are shown in mm (inch)
Dimensions subject to change
59
ITT [ ITT INDUSTRIES ]
