C&K E020 Series
Sealed Snap-acting Momentary Pushbutton Switches
A
Pushbutton
TERMINATIONS
V6, V8
VERTICAL MOUNT, V-BRACKET
V61, V81
VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim 'A'
SNAP-IN
E221SD3V6GE
DPDT
OPTION
CODE
DIM ‘A’
.460 (11,68)
.953 (24,21)
V6, V61
V8, V81
CONTACT MATERIAL
OPTION
CODE
RoHS
RoHS
COMPLIANT * COMPATIBLE *
YES
NO
YES
YES
NO
YES
YES
YES
YES
YES
YES
YES
GOLD OVER
SILVER
2,3
GOLD
1
CONTACT
MATERIAL
TERMINAL
PLATING
GOLD
1
TIN-LEAD
4
MATTE-TIN
5
GOLD
3
TIN-LEAD
4
MATTE-TIN
5
LOW LEVEL/DRY CIRCUIT OR POWER
EX21 MODELS ONLY: 0.4 VA MAX @ 20 V AC OR
DC MAX. OR 1 AMP @ 120 V AC OR 28 V DC.
LOW LEVEL/DRY CIRCUIT
EX25 MODELS ONLY: 0.4 VA MAX.
@ 20 V AC OR DC MAX.
RATINGS
B
K
P
G
L
R
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
NOTE:
Any models supplied with P, R, B or G contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
E121, E221 models
G, R or L contact material.
with all options when ordered with mandatory
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2
N.O. AND N.C. CONTACTS: Coin silver, with gold plate over nickel plate.
3
COMMON CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
5
TERMINALS: Copper alloy, with matte-tin alloy over nickel plate.
P, B or K contact material must be ordered with EX25 models.
R, G or L contact material must be ordered with EX21 models.
SEAL
E
EPOXY SEAL AND DISPOSABLE SPLASHPROOF BOOT
Disposable splashproof boot supplied standard.
Remove and discard boot
only after
soldering and
cleaning processes are complete.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A–24
www.ittcannon.com
ITT [ ITT INDUSTRIES ]
