MID 1.0/2.3
RF Coaxial Connectors
Description
ITT Industries, Cannon can now offer a range of surface mount coaxial
connectors developed to suit the requirements of modern interconnect
systems. Currently being produced with the emerging standard, 1.0/
2.3 75 interface for telecommunication equipments, these new
connectors can be used in fully automated production processes.
Featuring the new MID plated plastic bodies, these new connectors are
constructed in modules comprising 2, 3 or 4 ports. The modules are
light in weight, enabling them to be handled by suction pick and place,
and because all PCB contact pads are formed as part of the moulding,
exceptional coplanarity can be assured.
Theprovisionforadditionalmechanicalfixingoftheconnector, through
the PCB by rivet or screw is included, which will increase the connector
to board retention. With this additional fixing, a total axial force of
150N per port can be applied.
Features
2,3 or 4 port configurations
1.0/2.3 jack interface
Coplanarity of +/- 0.05mm
Flat top for suction pick-up
Light weight ( 2 port < 5g, 4 port < 13g)
Tape and reel packed
Resistant to normal soldering temperatures
Resistant to most PCB cleaning processes
Common Grounds
Specification
75 ohm nominal impedence
Interface to CECC 22230 & DIN 47247
Reflection factor: r = 0.1 up to 500 MHz
Inner contact resistance :<20m ohm
Outer contact resistance :<30m ohm
Soldering Temperature Profile
Proof voltage: 750 Vrms
Connector to board solder retention : 3N/mm²
280
210
140
70
0
30
60
90
120
150
180
Proc e ss tim e - Se c ond s
Dimensions are shown in mm (inch)
Dimensions subject to change
12
www.ittcannon.com
ITT [ ITT Cannon ]
