C&K A Series
1-4 Pole Rotary Switches
ACTUATOR
15
1.500" HIGH
03
.375" HIGH
05
.500" HIGH
14
1.500" HIGH
42
1.654" METRIC
S1
SCREWDRIVER SLOT
NOTE:
Actuators shown in position 1, fully CCW.
MOUNTING STYLE
R
3/8-32 THREAD
M
M10 x .75 METRIC
TYPICAL INSTALLATION
Maximum force to
push on knob should
not exceed 10 in./lbs.
NUT
L
Rotary
LOCKWASHER
PANEL MOUNTING
PANEL MOUNTING
Install switch with stop ring (if used) and
lockwasher in back of panel. Tighten hex nut
from front of panel.
On PC mounted switches, use hex nut and
lockwasher to hold stop ring in place.
Actuation torque: 8–16 oz./in.
Maximum torque: 30 oz./in.
3
/ IN. BUSHING
8
METRIC BUSHING
SHORTING/NON-SHORTING CONTACTS
N
S
NON-SHORTING CONTACTS (break-before-make)
SHORTING CONTACTS (make-before-break)
NOTE:
‘S’ shorting contacts are not available with A114, A124 and A214 models.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
L–5
www.ittcannon.com