ZIF Connectors
Accessories
Accessories
annon offers a wide selection of
accessories that allow the design
engineers to configure the product for
their exacting needs. The accessories range from
the simple actuating handle to junction and
backshells, as well as polarizing posts and
protective covers for the contacts.
C
Actuating handles are the same for the DL1/2/3
and DLM1/2/3 series. The DL5/DLM5 and DLM6
series have specific handles. Handles are sold
separately since many applications require the
connector to be attached or removed only by an
authorized technician.
Plastic junction shells are available for the
DL1/2/3 series for encasement of the crimp
contacts after complete installation into the
connector. These shells also make it possible for
the DL to be used as a cable-to-cable mating
connector as they can be used both on the plug
and the receptacle. The DL1/2/3 plastic junction
shells have optional secondary cable entry
capability by removing the molded in cable entry
plugs. Cable clamp kits are available to affix the
cable to the second entry. This second entry option
is very useful in applications where the large wire
sizes make the cable diameter too large to be
handled from a single entry port.
Polarizing posts are available to offer a keying Protective covers of plastic and anti-static rubber
feature for both the DL and DLM connectors. The are available to offer contact protection from
Metal Backshells are available for the entire polarizing posts can be installed in specific physical damage or dust. Since the DL series has a
DL/DLM series. The metal backshells are orientation so that plugs of the same size high density of contacts in an exposed area, these
constructed from die cast aluminum with a nickel connectors can only be mated in predetermined covers are very useful for many applications. For
plating to facilitate in EMI/RFI shielding of the receptacles. This feature offers the designer the example: where systems have multiple
connector system. Shielding has become a driving ability to fool-proof the attachment possibilities to connectors; when the connections are often left
force because of ever increasing stringent EMI/RFI protect accidental damage to the system.
regulations.
unattached; or when the system parts are put into
storage.
Accessories Selection Guide
Protective
Covers
Metal Shell
EMI/RFI
Plastic
Actuating
Handles
see page 47
Junction
Shell
Cable
Clamps
see page 46
Metal
Polarizing
Posts
see page 48
Connector
Series
Rubber
see page 47
Plastic
see page 47
Shielding
Backshell
see page 49
see page 46
see pages 44-45
DL1-156
DL2-96
DL3-60
ɀ
ɀ
ɀ
–
–
–
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
–
–
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
–
ɀ
ɀ
ɀ
–
–
–
–
ɀ
ɀ
ɀ
–
–
–
–
ɀ
ɀ
ɀ
–
–
–
–
–
–
–
–
–
–
ɀ
–
–
–
–
–
–
–
ɀ
ɀ
ɀ
–
–
–
–
ɀ
ɀ
ɀ
–
–
–
–
ɀ
ɀ
ɀ
–
–
–
–
ɀ
ɀ
ɀ
–
–
–
–
ɀ
ɀ
ɀ
–
–
–
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
–
–
ɀ
ɀ
ɀ
–
–
–
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
–
–
DL4-624
DL4-1248
DL4-2496
DL5-260
DLM1-156
DLM2-96
DLM3-60
DLM5-260
DLM6-360
DLD1-156
DLD2-96
ɀCompatible
–Not Compatible
Dimensions are shown in mm (inch)
Dimensions subject to change
43
ITT [ ITT Cannon ]
