Cannon VG/CA-Bayonet
01
(only for CA......-B) 02
Modification
– metric crimp contacts
– adapter for heat shrink boots
AWG crimp contacts
03
– adapter for heat shrink boots,
metric contacts
04
– rear mount, thread in flange,
metric crimp contacts
05
– trear mount, through holes in flange,
(CA3100, CA 3102,
CA 20, TBF)
06
– shrink boot adapter, thread holes
in flange, solder pot contacts
08
– angular endbell, through holes in
flange (for CA3100 only)
09
– angular endbell, through holes in
flange (for CA3100 only)
13
– shielded version, solder contacts
14
– shielded version, metric crimp con-
tacts
15
– shielded version, AWG crimp contacts
41
– shielded version, heat shrink boot
adapter
32
– endbell for shielded system cable acc.
MTV 6145-005
109 – F80, rear mount, thread holes in
flange (for CA3100 only)
111 – rear mount, thread holes (CA3102
only), solder contacts
F80 – AWG crimp contacts
A232 – Zinc cobalt black
A233 – Zinc cobalt green
F42 – less grommet and backshell
F0
– less contacts, contacts to be
ordered separately
see pages 51– 52
With Spring Washer and Friction Ring
These connectors feature a spring washer and a friction ring
under the coupling nut.
Advantage
Ordering example
CA06EW
CA06FW
CA06RW
CA08EW/FW
Vibrations are being compensated
according performance class insert
„W“ after Class E, F or R
– connector with spring washer, endbell
with cable and bushing
– connector with spring washer, endbell
for flex tube
– connector with spring washer and short
endbell
– connector with spring washer and
90° endbell
The connectors acc. to
VG95234
are generally delivered
with
spring washer.
Other Shell Styles
CA3100E-B-02/03/06
CA3100F-B-08/09
CA3100E-B-08/09
CA06PG-B
CA3101F-B-08/09
CA02L-B
CA20L-B
CA07A-B
CA00EP-B-TL
CA06EW-B-TLXX
– adapter for heat shrink boot
– 90° endbell for flex tube
– 90° endbell, cable clamp and bushing
– PG adapter
– 90° endbell flex tube
– receptacle with pcb solder contacts
– rear mount receptacle with pcb solder
contacts
– jam nut receptacle
– TINEL-LOCK adapter
– TINEL-LOCK adapter
Important!
When connectors are requested according to VG 95234
modification, e. g. with another finish, with other contact arrange-
ments and solder contacts, they are to be ordered only with the ITT
Cannon order reference.
Connectors acc. to VG95234 are generally available with insert po-
sitions X and Y only.
VG order reference with modification is not possible.
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
9