ZIF Connectors
Tools and Assembly
Lease Automatic Tooling — North America*
ABT-607 Pneumatic Crimper
The ABT-607 is a pneumatic powered and Machine Crimp Rate:
controlled machine. It is designed for customers 800 per hour
with moderate volume. This machine is designed
to semi-automatically crimp stamped and formed Power Requirements:
contacts onto pre-stripped stranded or single Pneumatic = 100 psi, 2 cu. ft. per min.
conductor electrical wire. This machine will
accommodate size 34 thru 12 AWG wire and is
actuated by the use of a foot pedal.
ABT-500 UCCD
The ABT-500 Universal Cannon Crimp Die, is a Machine Crimp Rate:
flywheel driven, electronically controlled machine 1300 per hour
that is designed to semi-automatically crimp
stamped and formed contacts on stranded or Power Requirements:
single conductor, pre-stripped wire. This machine Electrical = 115 VAC, 60 Hz, 20A
will accommodate size 34 thru 12 AWG wire. The
primary application of this machine is for
terminating discrete, pre-stripped, wire. The
machine is actuated by the use of a foot pedal.
ABT-620 UCCS
The ABT-620 Universal Cannon Crimper/Stripper Machine Strip/Crimp Rate:
is
a
pneumatic powered, microprocessor 1200+ per hour
controlled machine. It is designed to semi-
automatically strip insulation from stranded or Power Requirements:
single conductor electrical wire and attach a Electrical = 115 VAC, 60 Hz, 20A
stamped and formed contact by crimping. The Pneumatic = 80 psi, 3 cu. ft. per min.
machine will accommodate 34 thru 12 AWG wire.
Primary application of the machine is the
termination of jacketed cable where the individual
leads cannot be stripped by fully automated
equipment. The ABT-620 UCCS operates
automatically upon insertion of a wire or it can be
switched over to foot pedal operation as desired.
*For other geographical regions, contact Cannon for details.
Dimensions are shown in mm (inch)
Dimensions subject to change
59