PACKING
The MS54XX is packed in a 51 cm (20-inch) antistatic plastic tube with rubber end-plugs of two different
colours: One green and one black. The dot on the ceramic next to Pin 1 is facing the green end-plug. Each tube
contains 80 sensors. The tubes are marked "ANTISTATIC" and have an information label.
See the drawings below for more details.
PACKING TUBE OUTLINES
4.4
Information label
8.2
510
All measures in mm
ORDERING INFORMATION
MS5401-AM Miniature Pressure Sensor 1 bar, high sensitivity
MS5401-BM Miniature Pressure Sensor 1 bar, high linearity
MS5405-BM Miniature Pressure Sensor 1 bar, high linearity
MS5407-AM Miniature Pressure Sensor 7 bar, high sensitivity
MS5412-BM Miniature Pressure Sensor 12 bar, high linearity
Art.-Nr. 325401001
Art.-Nr. 325401000
Art.-Nr. 325405000
Art.-Nr. 325407000
Art.-Nr. 325412000
A = high sensitivity
B = high linearity
M = anticorrosive and antimagnetic stainless steel cap
FACTORY CONTACTS
Intersema Sensoric SA
Ch. Chapons-des-Prés 11
CH-2022 BEVAIX
Tel. 032 847 9550
Tel. Int. +41 32 847 9550
Telefax +41 32 847 9569
e-mail:
SWITZERLAND
http://www.intersema.ch
NOTICE
Intersema reserves the right to make changes to the products contained in this data sheet in order to improve the design or performance
and to supply the best possible products. Intersema assumes no responsibility for the use of any circuits shown in this data sheet, conveys
no license under any patent or other rights unless otherwise specified in this data sheet, and makes no claim that the circuits are free from
patent infringement. Applications for any devices shown in this data sheet are for illustration only and Intersema makes no claim or warranty
that such applications will be suitable for the use specified without further testing or modification.
DA54XX_011
May 9th, 2007
8
000054xx280 ECN 927