SMHF SERIES
SINGLE AND DUAL
15 WATT
DC/DC CONVERTERS
Squared corner and dot on top
of case indicate pin one.
Materials
Header Cold Rolled Steel/Nickel/Gold
Cover MHF+ Series and FMH Filter
Kovar/Nickel
SMHF
CASE G
Cold Rolled Steel/Nickel
#52 alloy (all cases)
compression glass seal
BOTTOM VIEW
Flanged package
See Figure 24
1.130 max
(28.70)
Pins
for pin configuration
Case dimensions in inches (mm)
Tolerance 0.005 (0.13) for three decimal places
0.01 (0.2) for two decimal places
unless otherwise specified
2.005 max
(50.93)
CAUTION
Heat from reflow or wave soldering may damage
the device. Solder pins individually with heat
application not exceeding 300°C for 10 seconds
per pin.
Flange Thickness: 0.047 (1.19)
FIGURE 23: CASE G MAXIMUM DIMENSIONS
BOTTOM VIEW CASE G1
Flanged cases: Designator "F" required in Case Option position of model number
SMHF Series Single and Dual
Projection Weld
Squared corner and dot on top
of case indicate pin one.
0.960
(24.38)
1
2
3
4
5
0.030 dia.
(0.76)
0.128 dia
(3.25)
0.560
(14.22)
8
7
6
0.160
(4.06)
0.000
FIGURE 24: CASE G1
41