MDC SERIES
UP TO 60 WATTS
FACTORY CONFIGURABLE DC/DC CONVERTERS
Table 2: Configurations
Case Size: 3.005 x 2.260 x 0.400 inches (76.33 x 57.40 x 10.16 mm
Configuration
Resulting
Module Power (Watts)
1
Selection Letter
Output Power (W)
30
2
15
0
5
0
0
2
0
2
4
1.5
0
A
B
C
D
E
F
60
45
40
33
26
20
1
1
1
1
0
0
0
2
2
0
1
1
0
0
0
1. Case has eighteen pins which may limit the number of output voltages available.
Case Size: 3. 005 x 1.505 x 0.400 inches (76.33 x 38.23 x 10.16 mm)
Configuration
Resulting
Module Power (Watts)
2
Selection Letter
Output Power (W)
30
0
15
2
5
0
1
1.5
0
G
H
30
8
0
0
2
2. Case has twelve pins which may limit the number of output voltages available.
Selecting a configuration:
Begin with the base model letters - MDC. Add a
configuration letter from “Table 2: Configurations”
that matches the number of outputs and power
level you require. Using “Table 1: Modules” from
page 1, choose from the available voltages in the
power levels determined by the configuration letter.
Add the chosen voltages to the model and configu-
ration letters beginning with the highest wattage
down to the lowest.
More Examples:
MDCD/15D/12S/5S/5S
33 watt total, five outputs:
15 watt dual 15 volt, 15 watt single 12 volt, 1.5 watt
single 5 volt, 1.5 watt single 5 volt
MDCB/3.3S/5D/12D
45 watt total, five outputs: 30 watt single 3.3 volt, 15
watt dual 5 volt, 1.5 watt dual 12 volt
As an example: To configure a four output, 45 watt,
converter begin with MDCB. Choose the output
voltages for the 30 watt, 15 watt, and 1.5 watt
modules in Table 2. For this example a 30 watt 5
volt dual output, a 15 watt 28 volt single output, and
a 1.5 watt 12 volt output were selected. The
resulting configuration is MDCB/05D/28S/12S.
Note: The specifications on the following pages are for the individual modules. The specifications/perform-
ance of the configured converter may vary from the specifications in the “Electrical Characteristics” tables.
Please contact the factory for details.
2