MDC SERIES
UP TO 60 WATTS
FACTORY CONFIGURABLE DC/DC CONVERTERS
Table 4: ENVIRONMENTAL SCREENING
TEST
STANDARD
/ES
yes
yes
yes
yes
yes
PRE-CAP INSPECTION
Method 2017, 2032
no
no
TEMPERATURE CYCLE (10 times)
Method 1010, Cond. B, -55°C to 125°C
CONSTANT ACCELERATION
Method 2001, 500 g
no
BURN-IN
Method 1015, 96 hours at 100°C case
no
FINAL ELECTRICAL TEST MIL-PRF-38534, Group A
Subgroups 1 and 4: +25°C case
yes
HERMETICITY TESTING
Fine Leak, Method 1014, Cond. A
Gross Leak, Method 1014, Cond. C
Gross Leak, Dip (1 x 10 )
no
no
yes
yes
yes
no
-3
FINAL VISUAL INSPECTION
Method 2009
yes
yes
Test methods are referenced to MIL-STD-883 as determined by MIL-PRF-38534.
Contact Information:
www.interpoint.com
Interpoint Headquarters USA
Phone: 1-800-822-8782
+425-882-3100
Interpoint UK
Phone: +44-1252-815511
Interpoint France
Phone: +33-134285455
Email:
poweruk@intp.com
Email:
powerfr@intp.com
Email:
power@intp.com
MDC-DTS Rev C
All technical information is believed to be accurate, but no responsibility is
assumed for errors or omissions. Interpoint reserves the right to make changes in
products or specifications without notice. MDC Series is a trademark of Interpoint.
Copyright © 2000-2001 Interpoint. All rights reserved.
15
CRANE [ Crane Aerospace & Electronics. ]
