Dc/Dc c
onVerters
CASE L
HR700
SERIES
70 WATT
Squared corner indicates pin one
Solder Seal
3.20 max (81.3)
2.850 (72.39)
.0.040 +0.005/-0.002
(1.02 +0.13/-0.05)
1
2
3
4
0.141
dia. x 6
(3.58)
BOTTOM VIEW
1.600 (40.64)
Solder Tip-off
9
0.550 (13.97)
0.350 (8.89)
10
0.000
7
5
8
6
0.040 +0.007/-0.000
(1.02 +0.18/-0.00)
0.595 max
(15.11)
0.00
0.250 +0.05/-0.00
(6.35 +1.3/-0.0)
0.180 (4.57)
0.000
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.3) for two decimal places
unless otherwise specified
CAUTION
Heat from reflow or wave soldering may damage the device.
Solder pins individually with heat application not exceeding 300°C for 10 seconds per pin
Materials
Header Cold Rolled Steel/Nickel/Tin
Cover Cold Rolled Steel/Nickel/Tin
Pins
#52 alloy pins 1-4, and 9-10
#52 alloy with copper core pins 5-8, ceramic seal
Case L, Rev C, 20060803
Please refer to the numerical dimensions for accuracy. All information is believed to be accurate,
but no responsibility is assumed for errors or omissions. Interpoint reserves the right to make
changes in products or specifications without notice.
Copyright © 1999-2006 Interpoint Corp. All rights reserved.
f
igure
9: c
ase l
www.interpoint.com
Page 6 of 7
HR700 Rev C - 20100212
2.460 max (62.50)
0.625 (15.88)
1.325 (33.66)
1.425 (36.20)
0.825 (20.96)
1.025 (26.04)
1.625 (41.28)
2.280 (57.91)
INTERPOINT [ INTERPOINT CORPORATION COMPANY ]
