MOR SERIES
120 WATT
DC/DC CONVERTERS
ENVIRONMENTAL SCREENING
TEST
125°C
125°C
STANDARD
/ES
/883 (Class H)*
PRE-CAP INSPECTION 25°C
Method 2017, 2032
yes
yes
yes
TEMPERATURE CYCLE (10 times)
Method 1010, Cond. C, -65°C to 150°C
Method 1010, Cond. B, -55°C to 125°C
no
no
no
yes
yes
no
CONSTANT ACCELERATION 25°C
Method 2001, 3000 g
Method 2001, 500 g
no
no
no
yes
yes
no
BURN-IN
Method 1015, 160 hours at 125°C
96 hours at 125°C case (typical)
no
no
no
yes
yes
no
FINAL ELECTRICAL TEST MIL-PRF-38534, Group A
Subgroups 1 through 6: -55°C, +25°C, +125°C
Subgroups 1 and 4: +25°C case
no
yes
no
yes
yes
no
HERMETICITY TESTING 25°C
Fine Leak, Method 1014, Cond. A
Gross Leak, Method 1014, Cond. C
no
no
yes
yes
yes
no
yes
yes
no
-3
Gross Leak, Dip (1 x 10 )
FINAL VISUAL INSPECTION 25°C
Method 2009
yes
yes
yes
Test methods are referenced to MIL-STD-883 as determined by MIL-PRF-38534.
Contact Information:
www.interpoint.com
Interpoint Headquarters USA
Phone: 1-800-822-8782
+425-882-3100
Interpoint UK
Phone: +44-1252-872266
Interpoint France
Phone: +33-134285455
Email: powerfr@intp.com
Email:
poweruk@intp.com
Email:
power@intp.com
20420-001-DTS RevD. This revision supercedes all previous releases.
All technical information is believed to be accurate, but no responsibility is assumed
for errors or omissions. Interpoint reserves the right to make changes in products
or specifications without notice. MOR Series is a trademark of Interpoint. Copyright
© 1999-2003 Interpoint. All rights reserved.
16
CRANE [ Crane Aerospace & Electronics. ]
