Electrical Specifications
2.4.1
Phase Lock Loop (PLL) Power and Filter
V
and V
are power sources required by the PLL clock generators for the Pentium 4
CCIOPLL
CCA
processor in the 775-land package. Since these PLLs are analog, they require low noise power
supplies for minimum jitter. Jitter is detrimental to the system: it degrades external I/O timings as
well as internal core timings (i.e., maximum frequency). To prevent this degradation, these supplies
must be low pass filtered from V .
TT
The AC low-pass requirements, with input at V are as follows:
TT
• < 0.2 dB gain in pass band
• < 0.5 dB attenuation in pass band < 1 Hz
• > 34 dB attenuation from 1 MHz to 66 MHz
• > 28 dB attenuation from 66 MHz to core frequency
The filter requirements are illustrated in Figure 2-1.
.
Figure 2-1. Phase Lock Loop (PLL) Filter Requirements
0.2 dB
0 dB
–0.5 dB
Forbidden
Zone
Forbidden
Zone
–28 dB
–34 dB
DC
1 Hz
Passband
fpeak
1 MHz
66 MHz
fcore
High
Frequency
Band
Filter_Spec
NOTES:
1. Diagram not to scale.
2. No specification exists for frequencies beyond fcore (core frequency).
3. fpeak, if existent, should be less than 0.05 MHz.
Datasheet
19
INTEL [ INTEL ]
