欢迎访问ic37.com |
会员登录 免费注册
发布采购

520 参数 Datasheet PDF下载

520图片预览
型号: 520
PDF下载: 下载PDF文件 查看货源
内容描述: 奔腾4处理器,支持超线程技术 [Pentium 4 Processors Supporting Hyper-Threading Technology]
分类和应用:
文件页数/大小: 96 页 / 1585 K
品牌: INTEL [ INTEL ]
 浏览型号520的Datasheet PDF文件第8页浏览型号520的Datasheet PDF文件第9页浏览型号520的Datasheet PDF文件第10页浏览型号520的Datasheet PDF文件第11页浏览型号520的Datasheet PDF文件第13页浏览型号520的Datasheet PDF文件第14页浏览型号520的Datasheet PDF文件第15页浏览型号520的Datasheet PDF文件第16页  
Introduction  
The Pentium 4 processor on 90 nm process in the LGA775-land package will also include the  
®
®
Execute Disable Bit capability previously available in Intel Itanium processors. This feature  
combined with a support operating system allows memory to be marked as executable or non-  
executable. If code attempts to run in non-executable memory the processor raises an error to the  
operating system. This feature can prevent some classes of viruses or worms that exploit buffer  
®
overrun vulnerabilities and can thus help improve the overall security of the system. See the Intel  
Architecture Software Developer's Manual for more detailed information.  
Intel will enable support components for the processor including heatsink, heatsink retention  
mechanism, and socket. Manufacturability is a high priority; hence, mechanical assembly may be  
completed from the top of the baseboard and should not require any special tooling.  
The processor includes an address bus powerdown capability that removes power from the address  
and data pins when the FSB is not in use. This feature is always enabled on the processor.  
1.1  
Terminology  
A ‘#’ symbol after a signal name refers to an active low signal, indicating a signal is in the active  
state when driven to a low level. For example, when RESET# is low, a reset has been requested.  
Conversely, when NMI is high, a nonmaskable interrupt has occurred. In the case of signals where  
the name does not imply an active state but describes part of a binary sequence (such as address or  
data), the ‘#’ symbol implies that the signal is inverted. For example, D[3:0] = ‘HLHLrefers to a  
hex ‘A, and D[3:0]# = ‘LHLH’ also refers to a hex ‘A(H= High logic level, L= Low logic level).  
“FSB” refers to the interface between the processor and system core logic (a.k.a. the chipset  
components). The FSB is a multiprocessing interface to processors, memory, and I/O.  
1.1.1  
Processor Packaging Terminology  
Commonly used terms are explained here for clarification:  
Pentium 4 processor on 90 nm process in the 775-land package — Processor in the FC-  
LGA4 package with a 1-MB L2 cache.  
Processor — For this document, the term processor is the generic form of the Pentium 4  
processor in the 775-land package.  
Keep-out zone — The area on or near the processor that system design can not use.  
Intel 925X/915G/915P Express chipsets — Chipsets that supports DDR and DDR2 memory  
technology for the Pentium 4 processor in the 775-land package.  
Processor core — Processor core die with integrated L2 cache.  
FC-LGA4 package — The Pentium 4 processor in the 775-land package is available in a Flip-  
Chip Land Grid Array 4 package, consisting of a processor core mounted on a substrate with  
an integrated heat spreader (IHS).  
LGA775 socket — The Pentium 4 processor in the 775-land package mates with the system  
board through a surface mount, 775-land, LGA socket.  
Integrated heat spreader (IHS) —A component of the processor package used to enhance  
the thermal performance of the package. Component thermal solutions interface with the  
processor at the IHS surface.  
12  
Datasheet