Debug Tools Specifications
9.3.1
Mechanical Considerations
The LAI is installed between the processor socket and the processor. The LAI plugs into
the socket, while the processor plugs into a socket on the LAI. Cabling that is part of
the LAI egresses the system to allow an electrical connection between the processor
and a logic analyzer. The maximum volume occupied by the LAI, known as the keepout
volume, as well as the cable egress restrictions, should be obtained from the logic
analyzer vendor. System designers must make sure that the keepout volume remains
unobstructed inside the system. Note that it is possible that the keepout volume
reserved for the LAI may include differerent requirements from the space normally
occupied by the heatsink. If this is the case, the logic analyzer vendor will provide a
cooling solution as part of the LAI.
9.3.2
Electrical Considerations
The LAI will also affect the electrical performance of the FSB, therefore it is critical to
obtain electrical load models from each of the logic analyzer vendors to be able to run
system level simulations to prove that their tool will work in the system. Contact the
logic analyzer vendor for electrical specifications and load models for the LAI solution
they provide.
§
104
Dual-Core Intel® Xeon® Processor 5000 Series Datasheet
INTEL [ INTEL CORPORATION ]
