2
Operating Conditions
M10-DATASHEET
2015.05.04
Operating Conditions
MAX 10 devices are rated according to a set of defined parameters. To maintain the highest possible performance and reliability of the MAX 10
devices, you must consider the operating requirements described in this section.
Absolute Maximum Ratings
This section defines the maximum operating conditions for MAX 10 devices. The values are based on experiments conducted with the devices and
theoretical modeling of breakdown and damage mechanisms. The functional operation of the device is not implied for these conditions.
Caution:
Conditions outside the range listed in the absolute maximum ratings tables may cause permanent damage to the device. Additionally,
device operation at the absolute maximum ratings for extended periods of time may have adverse effects on the device.
Single Supply Devices Absolute Maximum Ratings
Table 2: Absolute Maximum Ratings for MAX 10 Single Supply Devices—Preliminary
Symbol
Parameter
Min
Max
Unit
V
CC_ONE
V
CCIO
V
CCA
Supply voltage for core and periphery through on-
die voltage regulator
Supply voltage for input and output buffers
Supply voltage for phase-locked loop (PLL)
regulator and analog-to-digital converter (ADC)
block (analog)
–0.5
–0.5
–0.5
3.9
3.9
3.9
V
V
V
Dual Supply Devices Absolute Maximum Ratings
Table 3: Absolute Maximum Ratings for MAX 10 Dual Supply Devices—Preliminary
Symbol
Parameter
Min
Max
Unit
V
CC
V
CCIO
V
CCA
V
CCD_PLL
Supply voltage for core and periphery
Supply voltage for input and output buffers
Supply voltage for PLL regulator (analog)
Supply voltage for PLL regulator (digital)
–0.5
–0.5
–0.5
–0.5
1.63
3.9
3.41
1.63
V
V
V
V
Altera Corporation
MAX 10 FPGA Device Datasheet
INTEL [ INTEL CORPORATION ]
