A10-DATASHEET
2015.12.31
17
I/O Standard Specifications
I/O Standard Specifications
Tables in this section list the input voltage (VIH and VIL), output voltage (VOH and VOL), and current drive characteristics (IOH and IOL) for various
I/O standards supported by Arria 10 devices.
For minimum voltage values, use the minimum VCCIO values. For maximum voltage values, use the maximum VCCIO values.
You must perform timing closure analysis to determine the maximum achievable frequency for general purpose I/O standards.
Related Information
Recommended Operating Conditions on page 4
Single-Ended I/O Standards Specifications
Table 14: Single-Ended I/O Standards Specifications for Arria 10 Devices—Preliminary
VCCIO (V)
VIL (V)
Max
VIH (V)
VOL (V)
Max
0.4
VOH (V)
Min
(22)
IOL
I/O Standard
IOH (22) (mA)
(mA)
Min
Typ
Max
Min
Min
Max
3.0-V
2.85
3
3.15
–0.3
0.8
0.8
0.7
1.7
3.3
2.4
2
–2
LVTTL
3.0-V
2.85
3
3.15
–0.3
1.7
3.3
0.2
VCCIO – 0.2
0.1
–0.1
LVCMOS
2.5 V
1.8 V
1.5 V
1.2 V
2.375
1.71
2.5
1.8
1.5
1.2
2.625
1.89
–0.3
–0.3
–0.3
–0.3
1.7
3.3
0.4
2
1
2
2
2
–1
–2
–2
–2
0.35 × VCCIO 0.65 × VCCIO VCCIO + 0.3
0.45
VCCIO – 0.45
1.425
1.14
1.575
1.26
0.35 × VCCIO 0.65 × VCCIO VCCIO + 0.3 0.25 × VCCIO 0.75 × VCCIO
0.35 × VCCIO 0.65 × VCCIO VCCIO + 0.3 0.25 × VCCIO 0.75 × VCCIO
(22)
To meet the IOL and IOH specifications, you must set the current strength settings accordingly. For example, to meet the 3.0-V LVTTL specification
(2 mA), you should set the current strength settings to 2 mA. Setting at lower current strength may not meet the IOL and IOH specifications in the
datasheet.
Arria 10 Device Datasheet
Send Feedback
Altera Corporation