4
Recommended Operating Conditions
A10-DATASHEET
2015.12.31
Recommended Operating Conditions
This section lists the functional operation limits for the AC and DC parameters for Arria 10 devices.
Recommended Operating Conditions
Table 3: Recommended Operating Conditions for Arria 10 Devices—Preliminary
This table lists the steady-state voltage values expected from Arria 10 devices. Power supply ramps must all be strictly monotonic, without plateaus.
Symbol
Description
Condition
Minimum
(3)
Typical
Maximum
(3)
Unit
Standard and low power
V
CC
Core voltage power supply
V
CC
PowerManager
(5)
SmartVID
(6)
V
CCP
Periphery circuitry and transceiver
fabric interface power supply
Standard and low power
V
CC
PowerManager
(5)
SmartVID
(6)
1.8 V
V
CCPGM
V
CCERAM
Configuration pins power supply
Embedded memory power supply
1.5 V
1.2 V
0.9 V
0.87
0.8, 0.87
0.8
0.87
0.8, 0.87
0.8
1.71
1.425
1.14
0.87
0.9
(4)
0.83, 0.9
—
0.9
(4)
0.83, 0.9
—
1.8
1.5
1.2
0.9
(4)
0.93
0.86, 0.93
0.93
0.93
0.86, 0.93
0.93
1.89
1.575
1.26
0.93
V
V
V
V
V
V
V
V
V
V
(3)
(4)
(5)
(6)
This value describes the budget for the DC (static) power supply tolerance and does not include the dynamic tolerance requirements. Refer to the
PDN tool for the additional budget for the dynamic tolerance requirements.
You can operate –1 and –2 speed grade devices at 0.9 V or 0.95 V typical value. You can operate -3 speed grade device at only 0.9 V typical value.
Core performance shown in this datasheet is applicable for the operation at 0.9 V. Operating at 0.95 V results in higher core performance and higher
power consumption. For more information about the performance and power consumption of 0.95 V operation, refer to the Quartus
®
Prime
software timing reports, PowerPlay Power Analyzer report, and Early Power Estimator (EPE).
You can operate V
CC
PowerManager devices at either 0.83 V or 0.9 V. Power V
CC
and V
CCP
at 0.9 V to achieve –1 speed grade performance. Power
V
CC
and V
CCP
at 0.83 V to achieve lower performance using the lowest power.
SmartVID is supported in devices with –2V and –3V speed grades only.
Arria 10 Device Datasheet
Altera Corporation
INTEL [ INTEL CORPORATION ]
