IL78LXX
THREE-TERMINAL LOW CURRENT POSITIVE VOLTAGE REGULATORS
The IL78LXX, A Series of positive voltage regulators are
TO-226AA /
inexpensive, easy-to-use devices suitable for a multitude of
TO-92
applications that require a regulated supply of up to 100 mA. These
regulators feature internal current limiting and thermal shutdown
making them remarkably rugged. No external components are
required with the IL78LXX devices in many applications.
Pin 1. Output
2.Ground
These devices offer a substantial performance advantage over the
traditional zener diode-resistor combination, as output impedance and
quiescent current are substantially reduced.
3.Input
Standard application
• Wide Range of Available, Fixed Output Voltages
• Low Cost
Vout
Vin
IL78LXX
• Internal Short Circuit Current Limiting
• Internal Thermal Overload Protection
**
• No External Components Required
*
Ño
Ñin
0.1 F
µ
•
Complementary Negative Regulators Offered
0.33 F
µ
(IL79LXX Series)
• Available in either ±5% (AC) or ±10% (C)
Selections
A common ground is required between the input
and the output voltages. The input voltage must
remaintypically 2.0 V above the output voltage even
during the low point on the input ripple voltage.
*C in is required if regulator is located an
*appreciable distance from power supply filter.
**C O is not needed for stability; however, it does
*improve transient response.
ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Input Voltage (2.6 V-8.0 V)
(12V-18V)
Vl
30
35
Vdc
(24V)
40
Storage Temperature Range
Operating Junction Temperature Range
Tstg
TJ
-65 to +150
010+150
°C
°C
1