IL2902
MAXIMUM RATINGS*
Symbol
Parameter
Value
Unit
VCC
Power Supply Voltages
Single Supply
Split Supplies
32
±16
V
VIDR
VICR
ISC
Input Differential Voltage Range (1)
Input Common Mode Voltage Range
Output Short Circuit Duration
Junction Temperature
V
V
±32
-0.3 to 32
Continuous
TJ
Plastic Packages
150
°C
°C
Tstg
Storage Temperature
Plastic Packages
-55 to +125
IIN
TL
Input Current, per pin (2)
50
mA
Lead Temperature, 1mm from Case for 10 Seconds
260
°C
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
Notes:
1. Split Power Supplies.
2. VIN<-0.3V. This input current will only exist when voltage at any of the input leads is driven negative.
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
Parameter
Min
Max
Unit
DC Supply Voltage
V
±2.5 or
5.0
±15 or
30
TA
Operating Temperature, All Package Types
-40
+85
°C
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND≤(VIN or
V
OUT)≤VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
outputs must be left open.
2
INTEGRAL [ INTEGRAL CORP. ]
