IA186ES/IA188ES
Data Sheet
8-Bit/16-Bit Microcontrollers
November 15, 2011
The value of the PDIR0 register is FC0Fh at reset (see Table 48).
Table 47. PDIR0
15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
PDIR (15–0)
The value of the PDIR1 register is FFFFh at reset (see Table 48).
Table 48. PDIR1
15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
PDIR (31–16)
Bits [15–0]—PDIR [15–0] PIO Direction 0 Bits → For each bit, if the value is 1, the pin
is configured as an input. If 0, as an output. The values of these bits correspond to those
in the PIO data registers and PIO mode registers.
Bits [15–0]—PDIR [31–16] PIO Direction 1 Bits → For each bit, if the value is 1, the pin
is configured as an input. If 0, as an output. The values of these bits correspond to those
in the PIO data registers and PIO mode registers.
5.1.29 PMODE1 (076h) and PMODE0 (070h)
PIO MODE Registers. Each PIO pin is configured as an input or an output by the corresponding
bit in the PIO direction register. The bit number of PMODE corresponds to the PIO number (see
Table 46, PIO Mode and PIO Direction Settings). The value of the PMODE0 register is 0000h
at reset (see Table 49).
Table 49. PMODE0
15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
PMODE (15–0)
The value of the PMODE1 register is 0000h at reset (see Table 50).
Table 50. PMODE1
15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
PMODE (31–16)
Bits [15–0]—PMODE [15–0] PIO Mode 0 Bits → For each bit, if the value is 1, the pin
is configured as an input. If 0, an output. The values of these bits correspond to those in
the PIO data registers and PIO Mode registers.
®
IA211050902-19
UNCONTROLLED WHEN PRINTED OR COPIED
http://www.innovasic.com
Customer Support:
Page 90 of 154
1-888-824-4184