XC835/836
General Device Information
2.6
JTAG ID
JTAG ID register is a read-only register located inside the JTAG module, and is used to
recognize the device(s) connected to the JTAG interface. Its content is shifted out when
INSTRUCTION register contains the IDCODE command (opcode 04H), and the same is
also true immediately after reset.
The JTAG ID register contents for the XC835/836 Flash devices are given in Table 4.
Table 4
Device Type
Flash
JTAG ID Summary
Device Name
XC835*-2FG
JTAG ID
101B A083H
XC836*-2FR
XC836*-1FR
101B B083H
Note: The asterisk (*) above denotes all possible device configurations.
Data Sheet
20
V1.2, 2011-03