TC39x BC/BD-Step
HistoryChanges from Version 0.6 to Version 0.7
–
–
–
–
–
–
–
–
–
–
Change note of t6 from '13,7 ns' to '3 ns'
Change description of t6 from 'Data input delay time' to 'Data output valid time after rising clock edge'
Change description of t8 from 'Output hold time' to 'Data Input delay time'
Add parameter t9
Change note of t1 from 'push-pull, CL ≤ 30pF, tolerance ± 100kHz' to 'push-pull, CL ≤ 30pF, VEXT = 3.3V'
Change predicate of t1 from max to min
Change note of t2 from 'open-drain, CL ≤ 30pF, tolerance ± 20kHz' to 'open-drain, CL ≤ 30pF, VEXT = 3.3V'
Change note of t3 from 'CL ≤ 30pF' to 'CL ≤ 30pF, VEXT = 3.3V'
Change note of t4 from 'CL ≤ 30pF' to 'CL ≤ 30pF, VEXT = 3.3V'
Change note of t7 from 'CL ≤ 30pF' to 'CL ≤ 30pF, VEXT = 3.3V, TTL levels'
•
Flash
–
Change note of tER_Dev from '' to 'Valid for less than 1000 cycles, w/o UCB. Derived value for documentation
purpose.'
–
Change note of tER_Dev from 'Derived value for documentation purpose' to 'Valid for less than 1000 cycles,
w/o UCB. Derived value for documentation purpose.'
•
•
ED Current Consumption
–
–
Change max value of IDDSB from 8 mA to 15 mA
Change note of IDDSB from '27 mA' to '34 mA'
Package Parameters
–
–
–
Update table Thermal Characteristics of the Package
Change package type from PG-LFBGA-516-9 to PG-LFBGA-516-10
Change package type from PG-LFBGA-292-9 to PG-LFBGA-292-10
4.2
Changes from Version 0.6 to Version 0.7
•
•
Added preamble to AGBT stating that AGBT is lab-only interface without full test coverage
Changes in table "Absolute Maximum Ratings"
–
–
–
Change value of Parameter "VDDM"
Change value of Parameter "VIN"
Change value of Parameter "VIN"
•
•
Changes in table "Master Mode strong sharp (ss) output pads"
–
–
Change value of Parameter "t51"
Change value of Parameter "t510"
Changes in table "Current Consumption"
–
–
–
–
–
–
–
–
Change condition of Parameter "IDDPORST"
Change value of Parameter "IDDRAIL"
Change value of Parameter "IEVRSB"
Change value of Parameter "IEXTFLEX"
Change value of Parameter "ISLEEP"
Change condition of Parameter "ISTANDBY"
Change value of Parameter "ISTANDBY"
Change of Parameter "IDDRAIL" description
Data Sheet
529
V 1.2, 2021-03
OPEN MARKET VERSION