TC39x BC/BD-Step
HistoryChanges from Version 0.4 to Version 0.6
–
Change note of DCF from '10-5 fD, offset compensation filter enabled (FCFGMx.OEN = 001B)' to '10-5 fD,
offset compensation filter enabled (FCFGMx.OCEN = 001B)'
•
•
OSC_XTAL
–
–
Change note of CL1 from '2.35 pF' to '3.35 pF'
Add parameter CXTAL1
Changes in table 'DTS PMS' of DTS
Change max value of tM from 2.6 ms to 2.7 ms
–
•
•
Add table 'DTS Core'
Current Consumption
–
–
Change max value of IDDRAIL from 1370 mA to 1372 mA
Change TJ in real power pattern definition from 150°C to 160°C
•
Changes in table 'Module Core Current Consumption' of Current Consumption
–
Change name of Module Core Current Consumption from Module Core Current Concumption to Module
Core Current Consumption
–
–
–
–
–
–
–
Change note of IDDCx0 from 'real power pattern' to 'real power pattern; IPC=0.6'
Change max value of IDDCx0 from 40 mA to 45 mA
Change note of IDDCx0 from ''max power pattern'' to ''max power pattern; IPC=1.2''
Change note of IDDCx0 from '60 mA' to '70 mA'
Change note of IDDCxx from ''max power pattern'' to ''max power pattern; IPC=1.2''
Change note of IDDCxx from 'IDDCx0 + 60 mA' to 'IDDCx0 + 50 mA'
Change note of IDDGTM from 'real power pattern; TIMx, TOMx, ATOMx , MCSx active. 5 clusters at 200
MHz.' to 'real power pattern; TIMx, TOMx, ATOMx , MCSx active. 3 clusters at 200 MHz.'
–
–
–
Change max value of IDDGTM from 60 mA to 130 mA
Change note of IDDGTM from '88 mA' to '160 mA'
Change note of IDDSPU from ''CTRL.DIV = 01 ; FFT clocked at half SPU Clock'' to ''CTRL.DIV = 01 ; FFT
clocked at half SPU Clock; Both SPU modules are active.''
–
–
–
–
–
Change note of IDDSPU from '60 mA' to '70 mA'
Change note of IDDCIF from '20 mA' to '30 mA'
Change note of IDDMBIST from '100 mA' to '200 mA'
Change note of IDDCxx from 'real power pattern' to 'real power pattern; IPC=0.6'
Change note of IDDGTM from 'TIMx, TOMx active at 100MHz. ATOMx , MCSx, DPLL inactive.' to 'TIMx,
TOMx active at 100MHz. ATOMx , MCSx, DPLL inactive. 2 clusters at 100 MHz.'
–
–
–
–
Change max value of IDDGTM from 20 mA to 60 mA
Change note of IEXTRAIL from '58 mA' to '54 mA'
Change max value of IEXTRAIL from t.b.d mA to 60 mA
Change max value of IEXTFLEX from 30 mA to 22 mA
•
Changes in table 'Module Current Consumption' of Current Consumption
–
–
–
Change max value of IEXTLVDS from t.b.d mA to 20 mA
Change max value of ISCRSB from 4 mA to 6.5 mA
Change description of ISCRSB from 'SCR 8-bit Standby Controller in STANDBY Mode drawn at VEVRSB
supply pin' to 'SCR 8-bit Standby Controller current incl. PMS in STANDBY Mode drawn at VEVRSB supply
pin'
Data Sheet
525
V 1.2, 2021-03
OPEN MARKET VERSION
INFINEON [ Infineon ]
