PEB 2091
PEF 2091
Pin Descriptions
Pin No.
P-LCC-44 T-QFP64
M-QFP64
Pin No.
Symbol Input (I)
Output (O)
Function
2.2.1.8 Miscellaneous Function Pins
Not
available
64
ICE
I
IOM®-2 Clocks Enable
In IOM®-2 Master modes:
’0’: no FSC and DCL clocks are output.
Clocks may be applied to pins FSC and
DCL. However, they are ignored by the
IEC-Q. Data on pin DIN is ignored. Pin
DOUT is ’floating’.
’1’: Behavior as in former versions of
the IEC-Q. The IOM®-2 clocks FSC
and DCL are output on the
corresponding pins.
Due to an internal 100kOhm pull-up
resistor this is the default configuration
after reset if pin ICE is not connected.
This pin can be overridden by the bit
ADF2:ICEC. For more information
see "IOM®-2 Enable/Disable Mode",
page 53.
In IOM®-2 Slave modes:
Connect to VDD or leave open.
Internal pull up.
Not
available
42
SG
O
Undefined in stand-alone mode.
Leave it open
2.2.1.9 Test Pins
29
51
TP
I
I
Test pin: Not available to user. Do not
connect. Internal pull-down resistor.
20
37
TP1
Test pin: Not available to user. Do not
connect. Internal pull-down resistor.
Semiconductor Group
39
Data Sheet 01.99