欢迎访问ic37.com |
会员登录 免费注册
发布采购

ITS724G 参数 Datasheet PDF下载

ITS724G图片预览
型号: ITS724G
PDF下载: 下载PDF文件 查看货源
内容描述: 智能高侧电源开关工业用四通道: 4× 90mз [Smart High-Side Power Switch For Industrial Applications Four Channels: 4 x 90mз]
分类和应用: 外围驱动器驱动程序和接口开关接口集成电路电源开关光电二极管PC
文件页数/大小: 14 页 / 432 K
品牌: INFINEON [ Infineon ]
 浏览型号ITS724G的Datasheet PDF文件第6页浏览型号ITS724G的Datasheet PDF文件第7页浏览型号ITS724G的Datasheet PDF文件第8页浏览型号ITS724G的Datasheet PDF文件第9页浏览型号ITS724G的Datasheet PDF文件第10页浏览型号ITS724G的Datasheet PDF文件第11页浏览型号ITS724G的Datasheet PDF文件第12页浏览型号ITS724G的Datasheet PDF文件第13页  
®
PROFET ITS 724G  
Package and Ordering Code  
Published by  
Standard: PG-DSO20-15  
Infineon Technologies AG,  
St.-Martin-Strasse 53,  
D-81669 München  
Sales Code  
ITS 724G  
Ordering Code  
SP000219835  
© Infineon Technologies AG 2006  
All Rights Reserved.  
All dimensions in millimetres  
Attention please!  
The information herein is given to describe certain components and  
shall not be considered as a guarantee of characteristics.  
Terms of delivery and rights to technical change reserved.  
We hereby disclaim any and all warranties, including but not limited  
to warranties of non-infringement, regarding circuits, descriptions  
and charts stated herein.  
Infineon Technologies is an approved CECC manufacturer.  
Information  
For further information on technology, delivery terms and conditions  
and prices please contact your nearest Infineon Technologies Office  
in Germany or our Infineon Technologies Representatives worldwide  
(see address list).  
Warnings  
Due to technical requirements components may contain dangerous  
substances. For information on the types in question please contact  
your nearest Infineon Technologies Office.  
Definition of soldering point with temperature T :  
s
Infineon Technologies Components may only be used in life-support  
devices or systems with the express written approval of Infineon  
Technologies, if a failure of such components can reasonably be  
expected to cause the failure of that life-support device or system, or  
to affect the safety or effectiveness of that device or system. Life  
support devices or systems are intended to be implanted in the  
human body, or to support and/or maintain and sustain and/or  
protect human life. If they fail, it is reasonable to assume that the  
health of the user or other persons may be endangered.  
upper side of solder edge of device pin 15.  
Pin 15  
Printed circuit board (FR4, 1.5mm thick, one layer  
70µm, 6cm2 active heatsink area) as a reference for  
max. power dissipation P , nominal load current  
tot  
I
and thermal resistance R  
thja  
L(NOM)  
Infineon Technologies AG  
14 of 14  
2006-Mar-28  
 复制成功!