欢迎访问ic37.com |
会员登录 免费注册
发布采购

BTS723GW 参数 Datasheet PDF下载

BTS723GW图片预览
型号: BTS723GW
PDF下载: 下载PDF文件 查看货源
内容描述: 智能高侧电源开关两个渠道: 2× 100mз状态反馈适用于42V [Smart High-Side Power Switch Two Channels: 2 x 100mз Status Feedback Suitable for 42V]
分类和应用: 开关电源开关
文件页数/大小: 15 页 / 329 K
品牌: INFINEON [ Infineon ]
 浏览型号BTS723GW的Datasheet PDF文件第7页浏览型号BTS723GW的Datasheet PDF文件第8页浏览型号BTS723GW的Datasheet PDF文件第9页浏览型号BTS723GW的Datasheet PDF文件第10页浏览型号BTS723GW的Datasheet PDF文件第11页浏览型号BTS723GW的Datasheet PDF文件第12页浏览型号BTS723GW的Datasheet PDF文件第13页浏览型号BTS723GW的Datasheet PDF文件第14页  
BTS 723 GW  
Package and Ordering Code  
Published by  
Standard: P-DSO-14-9  
Infineon Technologies AG,  
St.-Martin-Strasse 53,  
D-81669 München  
Sales Code  
BTS 723 GW  
Ordering Code  
Q67060-S7501  
© Infineon Technologies AG 2001  
All Rights Reserved.  
Attention please!  
The information herein is given to describe certain  
components and shall not be considered as a guarantee of  
characteristics.  
Terms of delivery and rights to technical change reserved.  
We hereby disclaim any and all warranties, including but not  
limited to warranties of non-infringement, regarding circuits,  
descriptions and charts stated herein.  
Infineon Technologies is an approved CECC manufacturer.  
Information  
For further information on technology, delivery terms and  
conditions and prices please contact your nearest Infineon  
Technologies Office in Germany or our Infineon  
All dimensions in millimetres  
Technologies Representatives worldwide (see address list).  
Definition of soldering point with temperature T :  
upper side of solder edge of device pin 1.  
s
Warnings  
Due to technical requirements components may contain  
dangerous substances. For information on the types in  
question please contact your nearest Infineon Technologies  
Office.  
Pin 1  
Infineon Technologies Components may only be used in life-  
support devices or systems with the express written approval  
of Infineon Technologies, if a failure of such components can  
reasonably be expected to cause the failure of that life-  
support device or system, or to affect the safety or  
Printed circuit board (FR4, 1.5mm thick, one layer  
70µm, 6cm2 active heatsink area) as a reference for  
max. power dissipation P , nominal load current  
tot  
I
and thermal resistance R  
L(NOM)  
thja  
effectiveness of that device or system. Life support devices  
or systems are intended to be implanted in the human body,  
or to support and/or maintain and sustain and/or protect  
human life. If they fail, it is reasonable to assume that the  
health of the user or other persons may be endangered.  
25mm  
12mm  
12mm  
Infineon Technologies AG  
15  
2003-Oct-01  
 复制成功!