欢迎访问ic37.com |
会员登录 免费注册
发布采购

333MKP275K 参数 Datasheet PDF下载

333MKP275K图片预览
型号: 333MKP275K
PDF下载: 下载PDF文件 查看货源
内容描述: 类X2径向引线金属化聚丙烯电容器 [Class X2 Radial Lead Metallized Polypropylene Capacitors]
分类和应用: 电容器
文件页数/大小: 3 页 / 395 K
品牌: ILLINOISCAPACITOR [ ILLINOIS CAPACITOR, INC. ]
 浏览型号333MKP275K的Datasheet PDF文件第2页浏览型号333MKP275K的Datasheet PDF文件第3页  
Class X2  
Radial Lead Metallized  
Polypropylene Capacitors  
MKP  
EMI filter  
Antenna coupling  
Across the line  
Line bypass  
Operating Temperature Range  
Capacitance Tolerance  
-41°C to +±±1°C  
±±10 at ±ꢀkHz 25°C  
3±1 (ULz CSA)  
275 (IEC 61384-±4)  
Voltage Range  
VAC  
51-61kH  
Dissipation Factor  
1.±0 at ± ꢀkHz 21°C  
Capacitance  
Terminal to Terminal  
Terminal to Case  
0.33 µF  
15,000Mat 100VDC  
>30,000 Mat 100VDC  
>500Mat 500VDC  
Insulation Resistance  
>0.33 µF  
5,000 Mx µF at 100VDC  
>30,000 Mat 100VDC  
>500Mat 500VDC  
±111 hours at+±±1°C with ±250 of rated voltage with the voltage increased to  
±111Vrms for 1.± seconds every hour.  
Capacitance Change  
<5% maximum of initial measured value  
Dissipation Factor  
<0.15% at 1kHz  
Load Life  
Capacitance  
0.33uF  
>0.33uF  
Terminal to Terminal  
Insulation  
7500 MMinimum at 100VDC  
2500 MxuF Minimum at 100VDC  
Terminal to Case  
Resistance  
3000 MΩ  
500 hours at 90 to 95% RH, 40°C and no voltage applied after which the following voltage  
shall be applied for 1minute to each capacitor  
C0.0068uF 1500VAC, C>0.0068uF 1075VDC  
Capacitance Change  
<5% of initial measured value  
<0.15% at 1kHz  
kumidity Test  
Dissipation Factor  
Capacitance  
0.33uF  
>0.33uF  
Terminal to Terminal  
Insulation Resistance  
7500 MMinimum at 100VDC  
2500 MxuF Minimum at 100VDC  
15000 Mat 100 VDC  
Terminal to Case  
24 pulses  
Voltage Impulse Test  
Self-inductance  
C1.0uF Vp=2.5kVDC  
C>1.0uF Vp=2.5kV/C  
1 nH/mm along the capacitor pitch and lead length  
C0.0068uF 1500Vac or 2121 Vdc for 1 minute  
C>0.0068uF 1000Vac or 1768 Vdc for 1 minute  
Cut-off current: 2Aac or 10mAdc  
Terminal to Terminal  
Dielectric Strength  
Current limiting resistance: 1/V  
Terminal to Case  
2050VAC applied for 1 minute.  
Capacitance Drift Factor  
<1 nH/mm along the capacitor pitch and lead length  
Capacitance Temperature  
Coefficient  
-200 ppm/°C, 100ppm/°C  
Wound, Extended metallized film  
Construction  
Polypropylene film  
Dielectric  
Electrodes  
Leads  
Vacuum deposited zinc layers  
Tinned copper wire (lead free)  
Solvent resistant box with flame  
retardant epoxy sealed resin (UL 94V-O)  
Coating  
®
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com