TECHNICAL DATA
IN74HCT373A
Octal 3-State Noninverting
Transparent Latch
The IN74HCT373A may be used as a level converter for interfacing
TTL or NMOS outputs to High-Speed CMOS inputs.
The IN74HCT373A is identical in pinout to the LS/ALS373.
The eight latches of the IN74HCT373A are transparent D-type latches.
While the Latch Enable is high the Q outputs follow the Data Inputs.
When Latch Enable is taken low, data meeting the setup and hold times
becomes latched.
The Output Enable does not affect the state of the latch, but when
Output Enable is high, all outputs are forced to the high-impedance state.
Thus, data may be latched even when the outputs are not enabled.
ORDERING INFORMATION
IN74HCT373AN Plastic
IN74HCT373ADW SOIC
TA = -55° to 125° C for all packages
•
•
•
•
TTL/NMOS-Compatible Input Levels
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 4.5 to 5.5 V
Low Input Current: 1.0 µA
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs
Latch
Output
Q
Output
D
Enable Enable
L
L
L
H
H
H
L
H
L
H
PIN 20=VCC
PIN 10 = GND
L
No Change
Z
X
X
X
X = Don’t Care
Z = High Impedance
Rev. 00
IKSEMICON [ IK SEMICON CO., LTD ]
