TECHNICAL DATA
IN74HCT374A
Octal 3-State
Noninverting D Flip-Flop
High-Performance Silicon-Gate CMOS
The IN74HCT374A is identical in pinout to the LS/ALS374.
The IN74HCT374A may be used as a level converter for interfacing
TTL or NMOS outputs to High-Speed CMOS inputs.
Data meeting the setup and hold time is clocked to the outputs with
the rising edge of the Clock. The Output Enable input does not affect the
states of the flip-flops, but when Output Enable is high, the outputs are
forced to the high-impedance state; thus, data may be stored even when
the outputs are not enabled.
ORDERING INFORMATION
IN74HCT374AN Plastic
IN74HCT374ADW SOIC
TA = -55° to 125° C for all packages
•
•
•
•
TTL/NMOS-Compatible Input Levels
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 4.5 to 5.5 V
Low Input Current: 1.0 µA
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
PIN 20=VCC
PIN 10 = GND
Inputs
Clock
Output
Q
Output
Enable
D
L
L
L
H
L
H
L
L,H,
X
no
change
H
X
X
Z
X = don’t care
Z = high impedance
Rev. 00