TECHNICAL DATA
IN74ACT109
Dual J-K Flip-Flop
with Set and Reset
High-Speed Silicon-Gate CMOS
The IN74ACT109 is identical in pinout to the LS/ALS109,
HC/HCT109. The IN74ACT109 may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
This device consists of two J-K flip-flops with individual set, reset,
and clock inputs. Changes at the inputs are reflected at the outputs with
the next low-to-high transition of the clock. Both Q to Q outputs are
available from each flip-flop.
ORDERING INFORMATION
IN74ACT109N Plastic
IN74ACT109D SOIC
•
•
•
•
•
TTL/NMOS Compatible Input Levels
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 4.5 to 5.5 V
Low Input Current: 1.0 µA; 0.1 µA @ 25°C
Outputs Source/Sink 24 mA
TA = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs
Clock
Outputs
Set Reset
J
K
X
X
X
L
Q
Q
L
H
L
H
L
X
X
X
X
X
X
L
H
L
L
H
L
H*
H*
H
H
H
H
H
H
H
H
H
H
L
H
H
L
L
Toggle
No Change
H
H
X
H
X
H
L
PIN 16=VCC
PIN 8 = GND
L
No Change
X = Don’t care
*Both outputs will remain high as long as Set and
Reset are low, but the output states are
unpredictable if Set and Reset go high
simultaneously.
Rev. 00