TECHNICAL DATA
IN74ACT74
Dual D Flip-Flop with Set and Reset
High-Speed Silicon-Gate CMOS
The IN74ACT74 is identical in pinout to the LS/ALS74, HC/HCT74.
The IN74ACT74 may be used as a level converter for interfacing TTL or
NMOS outputs to High Speed CMOS inputs.
This device consists of two D flip-flops with individual Set, Reset,
and Clock inputs. Information at a D-input is transferred to the
corresponding Q output on the next positive going edge of the clock input.
Both Q and Q outputs are available from each flip-flop. The Set and Reset
inputs are asynchronous.
•
TTL/NMOS Compatible Input Levels
•
Outputs Directly Interface to CMOS, NMOS, and TTL
•
Operating Voltage Range: 4.5 to 5.5 V
•
Low Input Current: 1.0
μA;
0.1
μA
@ 25°C
•
Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74ACT74N Plastic
IN74ACT74D SOIC
T
A
= -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs
Set
L
H
L
H
H
H
H
PIN 14 =V
CC
PIN 7 = GND
Reset
H
L
L
H
H
H
H
L
H
Clock
X
X
X
Data
X
X
X
H
L
X
X
Outputs
Q
H
L
H
*
H
L
Q
L
H
H
*
L
H
No Change
No Change
H
H
X
No Change
*Both outputs will remain high as long as Set
and Reset are low, but the output states are
unpredictable if Set and Reset go high
simultaneously.
X = don’t care
Rev. 00