IL2904
*
MAXIMUM RATINGS
Symbol
VCC
Parameter
Power Supply Voltages
Value
Unit
32
±16
V
Single Supply
Split Supplies
VIDR
VICR
ISC
Input Differential Voltage Range (1)
Input Common Mode Voltage Range
Output Short Circuit Duration
Junction Temperature
V
V
±32
-0.3 to 32
Continuous
TJ
150
Plastic Packages
°C
°C
Tstg
Storage Temperature
-55 to + 125
Plastic Packages
IIN
TL
Input Current, per pin (2)
50
mA
Lead Temperature, 1mm from Case for 10 Seconds
260
°C
*
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device.
These are stress ratings only and functional operation of the device at these or any other conditions beyond those
indicated under “recommended operating conditions” is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Functional operation should be restricted to the Recommended Operating Conditions.
+ Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOI C Package: : - 7 mW/°C from 65° to 125°C
Notes:
1. Split Power Supplies.
2. VIN< -0.3V. This input current will only exist when voltage at any of the input leads is driven negative.
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
Parameter
Min
M ax
Unit
V
DC Supply Voltage
±2.5
±15 or
or 5.0
30
TA
Operating Temperature, All Package Types
-40
+ 85
°C
This device contains protection circuitry to guard against damage due to high static voltages or electric
fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages
to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND≤(VIN or
V
OUT)≤VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
outputs must be left open.
2011, January, Rev. 01